IMP Pumps Mini Plus 15/60-130 Heating Pump 230V High-Efficiency Pump P26/19

IMP Pumps NMT MINI PLUS 15/60-130 Circulation Pump 230V 1" Heating Pump

IMP Pumps NMT MINI PLUS 15/60-130 – High-Efficiency Circulation Pump

The IMP Pumps NMT MINI PLUS 15/60-130 is a modern, speed-controlled high-efficiency circulation pump for heating, climate, and cooling systems. Thanks to a permanent magnet motor with integrated frequency converter, the pump achieves an energy efficiency index EEI ≤ 0.18 and ensures particularly energy-saving operation.

The operating mode, power level, and current power consumption can be conveniently set and monitored via the integrated display with control button. Any error messages are displayed as two-digit error codes, allowing for quick diagnosis.

The pump is ideally suited for radiator systems, underfloor heating, and heating and ventilation systems.

Technical Data

• Manufacturer: IMP Pumps
• Model: NMT MINI PLUS 15/60-130
• Article Number: 979525901
• Voltage: 1~230 V
• Power Consumption: 35 W
• Nominal Pressure: PN 10
• Connection: 1 inch
• Installation Length: 130 mm
• Energy Efficiency Index: EEI ≤ 0.18

Operating Modes

• Proportional Pressure Mode (3 stages) – recommended for radiator systems
• Constant Pressure Mode (3 stages) – ideal for underfloor heating
• Fixed Speed (3 stages) – for heating and ventilation systems
• Summer Mode – prevents rotor blockages through regular short runs

Protection Functions

• Electronic overload protection
• Dry-running protection with automatic speed reduction
• Media-lubricated bearings for durable operation

Operating Fluids

• Suitable for:

• Clean water
• Water-glycol mixtures according to heating standards (e.g., VDI 2035)

For a glycol content above 20%, an adjustment of the pump settings is recommended.

Fluid Temperature Range

• At 25 °C ambient: +2 to +110 °C
• At 40 °C ambient: +2 to +95 °C

Material Design

• Pump Casing: Grey cast iron with KTL coating (corrosion-resistant)
• Rotor Can: one-piece without welds
• Shaft & Rotor Cladding: Stainless steel AISI 316
• Impeller: glass-fiber reinforced plastic PES GF30
• Bearings: Graphite

A removable thermal insulation shell for the pump casing is included in the scope of delivery.

• Condition: new
• Our Article Number: P26/19